Components

- Replacement Rotor Bolt kits for Formula rotors - 6/pack

Jagwire's C-Clips are little nylon clips designed for use with Jagwire's Stick-On Guides (sold separately) and compatible frame cable guides. The C-Clips fit over your housing and hydraulic lines and snap into the guides to keep the lines in place, tidy and operating smoothly.

Hellbender 70 Lite headset.

- Reinforced hydraulic tubing designed for Magura mineral-oil fluid - Tubing kits are cut-to-fit with one pre-crimped 'fixed' end (90-degree on MT series and Gustav-M) and include one tubing reinforcement insert and compression ferrule/olive per kit - Sold each: (1) kit per brake - Bulk tubing is for RT series road rim brakes, HS-series rim brakes and Julie disc brakes: fittings sold separately - Choose black or white options for MT Next and MT series

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud with a concave carbide-aluminum design. The open space and edges created by the large concave crown result in twice the surface area for increased traction and grip. - Concave tip for traction, durability, and longevity - Aluminum base to save weight - Compatible with 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.

Shimano Sora 9-Speed replacement chainrings gets your drivetrain operating smoothly again.

We designed Teravail tubeless tape for no-hassle installation. Its slight stretch allows the tape to easily conform to your rims. The translucent material shows you exactly where the tape makes contact. It's tacky enough to prevent shifting but easy to pull up if needed, and it won't leave residue on your rims. - Teravail Tubeless Tape comes in a variety of widths to fit almost any rim. - Teravail Tubeless Tape is available in a variety of widths and roll lengths. - Ten-meter length is enough for a single layer on approximately four wheels

Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.

Orange Seal’s rim tape comes in 18mm, 24mm, and 45mm widths fitting most bike rims. The elasticity of the tape allows greater flexibility in fitting different types of rims and form factors.

FSA ATB chainrings deliver flawless shifting for any mountain drivetrain. Available in alloy and steel options.

45NRTH utilizes a two-piece construction method to create a reliable and high-performing bicycle tire stud, featuring a concave carbide-aluminum design. The super-sized concave crown creates open space and inside edges of the bowl, resulting in twice the surface area for increased traction and grip. - Concave tip for durability and longevity - Aluminum base to save weight - Compatible with the 45NRTH stud insertion tool - Compatible with all studdable 45NRTH tires - Large stud offers more bite than regular concave stud and less rolling resistance than XL stud - We design 45NRTH tires for extreme winter cycling applications. We do not recommend this product be used with power assist bikes as the additional torque and system weight can lead to pre-mature casing wear and stud loss.

Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).

- Ultralight, CNC-machined 6061 aluminum spacers for fine-tuning stem height - Includes one each: 3, 5, 10mm spacers and two each: 1mm spacers

Subzero tire sealant. It's formulated to maximize extreme frigid temperature; enabling riders in the far North to ride with flat protection. All while offering the same quick-sealing properties you’ve come to expect. - Premium Latex coats the whole casing, from tire bead to tread cap - Seals punctures up to 1/4" with the use of Nanites - Developed to add as little weight to a tire as possible - Made of eco-friendly biodegradable ingredients - Subzero sealant is developed for use in below-freezing conditions down to -20F

- Made of durable light weight polyurethane - Provides a protective layer between road hazards and the inner tube - Weighs less than liquid fills and thorn-resistant tubes - Can be reused - Easy, mess free installation

- Drivetrain Speeds: 11 - Chainring BCD: 110 Shimano Asymmetric - Material: Aluminum

Shimano 105 FC-R7000 asymmetric 110 BCD chainrings for 2x11 drivetrains.

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Replacement PowerGlide ring for 11 speed crankset. - Compatible with Asymmetrical Yaw front derailleurs - Bolt Circle Diameter (BCD): 110 BCD - Material: Aluminum

Shimano chainrings offer durability and confidence-inspiring performance, and go a long way towards getting a drivetrain back to optimum working condition.

Smart Sam goes well on any terrain and even on the road it rolls effortlessly. It will roll over just about anything in the Double Defense version.

FSA Pro Road Chainrings deliver flawless shifting for any road drivetrain. - Precision CNC machined AL7075/T6 alloy

Ease of use, lightweight, and optimum performance in a single product. The DT Pro Head shape, combined with both a torx and a square tool interface, makes wheel building a lot easier. The spherical contact surface aligns the nipple perfectly with the spoke. All-brass nipples are recommended for e-bike use. Weight: starting at 26g for 64 nipples.

Dimension Chainrings. - No ramps, pins, or shift aids

Original equipment on SRAM and Truvativ cranks, these chainrings also work well with other drivetrains. - 104mm BCD - Material: Aluminum

The Terreno Dry bridges the gap between file treads, and traditional all-conditions treads. The key to this is the unique angled "fish scale" design, that allows the center tread to roll extremely fast, yet offer traction when loaded in cornering and braking. Add the transitional height mid and side tread, and the Terreno Dry transitions as smoothly as it rolls. The exclusive 3C Graphene compound structure places 3 unique compounds where you need them most, adding to the performance. From gravel grinding to medium conditions cross racing, the Terreno Dry offers consistent performance. - Center scales are ramped, providing a fast rolling leading edge, yet sharp effective braking and cornering edges - Exclusive 3C compound construction featuring Graphene compound technology - File-tread Gravel and Cyclocross race tire, designed for a range of conditions

Corsa inspired tread design, for paved surfaces and hard-packed gravel. The smooth Corsa inspired center rolls fast, while the side tread "scales" provide durable bite when cornering and braking. - Three compounds in the tread (3C) for increased wear life and grip - Functionalized GRAPHENE 2.0 compound delivers ultimate performance - Corsa-inspired smooth center tread minimizes rolling resistance - Gravel tire designed for paved surfaces and hard-pack terrains - Side tread “scales” provide dependable bite through corners, and when braking

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

- Pig DH-Pro feature angular contact sealed upper bearing and an industrial cartridge sealed bearing with an alloy upper cup and CrMo lower cup - Pig feature oversized 1/4" lower ball bearings, 5/32" upper bearings - Big Fat Pig feature super oversized caged ball bearings - Pig: External Cup, traditional - Pig S.H.I.S.: EC34/28.6|EC34/30 - Big Fat Pig S.H.I.S.: EC49/38.1|EC49/40 - Pig DH Pro S.H.I.S.: EC34/28.6|EC34/30 - Stack: 15.4mm/13.6mm (Pig), 17mm/11.7mm (Big Fat Pig), 15.5mm/16mm (Pig DH Pro) - Color: Black - Weight: 193g (Pig), 345g (Big Fat Pig), 198g (Pgi DH Pro)

- Precision CNC-machined AL7075/T6 - Shifting ramps and stainless steel pins on outer rings - Laser-etched logo - Crankset Compatibility: Gossamer ABS 2019

Riding technical XC? The Barzo is the choice of the 2015 World Champion, as well as the winner of the BC Bike Race. How can such an aggressive XC tire roll so fast? The magic starts in the center tread, where we place an alternating ridge design and progressive sipe angles. Cornering duties are handled by the moto-style block knobs, laid out in a proven V-formation. The result is a tire that corners as fast as it rolls while still offering the protection of a full-depth tread. Rocks and roots? Check. World Championship? Check. - Aggressive XC tread for the most technical terrain - Medium spaced knobs for a range of terrain and conditions

FSA Super Road Chainrings are designed to provide flawless shifting, with minimal weight and unmatched durability. - Precision CNC machined AL7075/T6 alloy

Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.

MicroSHIFT's H11 cassettes are manufactured to exacting tolerances for straightness, shift quality, and durability, resulting in responsive shifting performance that lasts longer than you might expect. - Continuously molded cogs are straighter than stamped steel, resulting in more consistent, predictable shifting performance - Precision ramps and chamfers for rapid chain movement - Compatible with SRAM and Shimano 11-speed systems - Steel lock ring - Chrome plated for hardness and corrosion resistance Gear combinations: - 11-25T: 11-12-13-14-15-16-17-19-21-23-25 - 11-28T: 11-12-13-14-15-16-17-19-21-24-28 - 11-32T: 11-12-13-14-15-17-19-21-24-28-32 - 11-42T: 11-13-15-17-19-21-24-28-32-36-42

The all new Turbine 11 Speed rings are ready to ride. Completely redesigned from the ground up, these rings shift like nothing else. The Turbine rings are machined from 7075 aluminum, so they are built to last. Rings are CNC'd from 7075 alloy, creating a ring with instantaneous smooth and quiet shifting, even under load. These 2x rings are super stiff at a minimal weight, resulting in a ring that demonstrates sharp and quick shifts while being highly resistant to impacts.

The Mezcal is the versatile all-rounder that gets you to the podium, time after time. Ride a combination of terrain? This is the choice of the pros. The Mezcal features a unique low-profile tread that is tightly spaced in the center for low rolling resistance and durability. Countless effective edges work together to grip a variety of terrain, while directional siping on each knob finds traction in the roots and rocks. The best tires are built with the best casing and compound, and the Mezcal is no exception.

Whether in Gravel or Cyclocross, one thing is for certain-course conditions are constantly changing. When you roll up to the start line, be confident knowing that you have the performance advantage of the Terreno Mix all conditions tread, no matter the terrain. At the heart of the design is a fast rolling center ridge, which is designed to minimize rolling resistance, while still providing confident braking traction. Cornering and off camber work is confidently handled by alternating open shoulder lugs. These lugs are shaped to allow a supple feel for pavement and hardpack surfaces, while still offering a solid effective edge for grass and loam terrain. The exclusive 3C Graphene compound structure places 3 unique compounds where you need them most, adding to the performance. - Exclusive 3C compound construction featuring Graphene compound technology - Fast rolling center-ridge design - Open shoulder lugs for secure off-camber traction - Traditional tread profile, for smooth transitions, across varied terrain

Replacement swing plates for Alternator 1.0 dropouts.

• Machined aluminum mounting arm • Delrin (engineering grade thermoplastic) chain guide body • Adjustable design • Fits 32T to 38T chainrings • Compatible with 1x drivetrain systems • Clamp mount: 31.8-34.9mm • Weight: 75g (BB Mount), 88g (clamp mount), 80g (Mini)

Jagwire's Open End Caps are quality metal ferrules that put the finishing touch on your brake cable housing sections. They reinforce them so they stay straight and allow the cables and brakes to operate as smoothly as possible.

Sport brake housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better braking response - High carbon internal steel coil for improved stiffness - Appropriate for Teflon coated cables as well as steel and galvanized - Length: 10m

The MICHELIN Protek Max provides excellent grip on wet and slippery surfaces thanks to its rubber compound and progressive siping with more grooves on the shoulders. Protek Max tires feature MICHELIN's Protek tread design, with a uniform center pattern, that provides improved comfort and performance. A super-durable 5mm puncture protection layer helps to ward off punctures. - Smooth, siped tread rolls fast and grips the road well in wet conditions - 5mm puncture protection ply underneath tread - Reflective strip on sidewalls to provide added low light visibility - Long wearing tread compound Weights: 26 x 1.40 (750g) 26 x 1.85 (1235g)

The XCO European Champion tire The Mezcal is the versatile all-rounder that gets you to the podium, time after time. Ride a combination of terrain? This is the choice of the pros. The Mezcal features a unique, low-profile tread that is tightly spaced in the center for low rolling resistance and durability. Countless effective edges work together to grip a variety of terrain, while directional siping on each knob find traction in the roots and rocks. The best tires are built with the best casing and compound, and the Mezcal TNT is no exception. Using the proprietary Graphene enhanced 4C compound, the Mezcal attains the holy grail of XC tires; grip, durability, and low weight. - Defined center-ridge tread for low rolling resistance

- 3mm thick protective layer - The archetypal high quality touring tire - E-Bike Ready. You can choose every Marathon for your E-Bike (E-25). The main sizes are approved and tested for E-bikes up to 50 km/h (E-50).

- For Trail and All Mountain - Aggressive tread design with stable shoulder blocks - Lightweight and extremely versatile - Significantly improved self-cleaning - Available in Super Ground, Super Trail and TwinSkin construction - Available in Addix Soft, Addix Speegrip and Addix Performance compound

- A legendary Cross Country tread offering excellent traction and cornering - Torch Tread multi-height high-density rubber knobs - Burning Edge silica-reinforced cornering knobs - ASB anti-pinch sidewalls

FSA's MTB Pro chainrings deliver flawless shifting for mountain drivetrains. - Precision CNC machined AL7075/T6 alloy - Shifting ramps and stainless pins for improved performance - D-10 chainrings are double 10 speed Sram/Shimano compatible, but are only guaranteed perfect fitment on FSA MTB cranksets

GRAVEL Sometimes the greatest journeys are full of memorable experiences: churning over towering mountain passes, trying to make it to the next town before the café closes, pedaling from sunrise to sunset, or sleeping in when you’re gifted with perfect weather and an incredible view from your tent. We designed the Sparwood around long-distance mixed-terrain routes, for riders seeking to experience the land, not just ride on it. HOW IT WORKS - Center lugs are raised and ramped for rolling efficiency; the diamond-shaped lugs squeeze in for grip as they contact dirt, then back out to shed debris. - Diamond- and chevron-shaped transition lugs feature staggered spacing and height to improve shedding and traction. - L-shaped side lugs dig in for grip while braking through corners, but roll quickly when off the brakes.

The Minion DHF has become the benchmark for riders wanting maximum control in loose and muddy conditions. - Directional ramped center knobs provide low rolling resistance - Minion signature channel cut side knobs provide excellent cornering traction - Intended use: loose, loose over hard, medium, wet

Campagnolo ProTech bottom brackets feature a patented external sealing ring design that protects a strong, resilient fiberglass-charged polyamide central tube from the harmful ingress of water, mud and grit. - Designed specifically for gravel riding and racing to protect against water, mud & grit

Who knew we could make a thru axle disappear? The Maxle Stealth offers a light, low profile alternative to Maxle Lite. Features - 34g lighter than Maxle Lite - Easy installation with a 6mm Allen wrench

- Heavy duty steel construction - Variety of rises offered - Due to size some of the larger handlebars are freight intensive

- Ultimate XC Racing tire with lots of speed and grip - Well suited for a variety of riding conditions. - Fast accelerating, hard-pack cross-country tire - Numerous knobs provide multiple contact points with the ground

Replacement frame parts and hinge clamps for Ritchey Break-Away frames. - 34.9mm compatible with Ti-Carbon Road - Titanium Cross (all years) - Steel Break-Away frames (2012 and newer) - 31.8mm compatible with Steel Road and CX Break-Away bikes prior to 2012 models - 41.5mm compatible with Break-Away Carbon Road frame - 45.0mm compatible with Break-Away Tandem

Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.

Sport shift housing packs high performance features into a colorful and durable package, making it a functional and aesthetic upgrade. - Slick-Lube lined housing reduces friction for faster cable movement and better shifting performance - Linear strand construction for compressionless performance - Appropriate for Teflon coated cables as well as steel and galvanized - 4.0mm outer diameter solid colors; 4.5mm OD braided colors - Length: 10m

ReMatch adapters are designed to integrate different generations of Shimano Brakes to Shimano Shifters. Rematch Adapter 1.2 connects Shimano I-Spec A/B brake to I-Spec II Shifter. - Made from CNC Machined T6061 Aluminum - Anodized Black - Includes all necessary hardware for both I-Spec A and I-Spec B brake - No additional hardware needed

The Speedster was designed for rolling speed and minimal drag on hard pack or paved terrain. Count on this tire for high performance during BMX racing, dirt jumps, and urban shredding. - A collaboration between SE Bikes and Vee Rubber - MPC—Durable long life compound that is designed to be functional on all terrain types - Wire bead