Tires/Tubes

Riding technical XC on your e-bike? The e-Barzo is your choice for traction and range. How can such an aggressive XC tire roll so fast? The magic starts in the center tread, where we place an alternating ridge design and progressive sipe angles. Cornering duties are handled by the moto-style block knobs, laid out in a proven V-formation. The result is a tire that corners as fast as it rolls while still offering the protection of a full-depth tread. Rocks and roots? Check. World Championship? Check. - Aggressive XC tread for the most technical terrain - Medium spaced knobs for a range of terrain and conditions - Graphene 2.0 compound reduces rolling resistance, increasing range and battery life

The e-bike version of the new Vittoria Mazza raises the bar on e-Enduro performance for mixed terrain! Starting with a defined center tread, the e-Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift. The stepped leading edge rolls like a ramp but digs in on climbs, making e-Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction while also accelerating mud clearing. Cornering on the e-Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. The tire's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe-width pattern provides tactile grip at the knob surface without sacrificing speed or grip - Graphene 2.0 compound reduces rolling resistance, increasing range and battery life

The e-bike version of the new Vittoria Mazza raises the bar on e-Enduro performance for mixed terrain! Starting with a defined center tread, the e-Mazza uses deep siping in the direction of rotation, allowing the tire to roll fast while still opposing drift. The stepped leading edge rolls like a ramp but digs in on climbs, making e-Mazza a top choice for both front and rear use. Substantial spacing was designed into the center tread to provide braking traction while also accelerating mud clearing. Cornering on the e-Mazza is handled by Vittoria's trademark progressive sipe width technology, which gives a gummy inside effective edge without the instability that competitors experience on the outside of the tread. The tire's generous tread depth claws into a range of terrain and is stabilized with Vittoria's proprietary 4C compound layering process. Four separate Graphene 2.0 compounds are layered, allowing the surface of the tread to remain tacky while the base remains planted. This ensures each effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance and increased wear life. - Aggressive profile with ample sipe spacing for mixed terrain - Progressive sipe-width pattern provides tactile grip at the knob surface without sacrificing speed or grip - Graphene 2.0 compound reduces rolling resistance, increasing range and battery life

The Martello Race tire has been developed to provide the best combination of riding feeling and performance for technical trails at maximum speed. The design provides performance you expect on the most demanding and wide range of Enduro and DH courses. Start with a World Championship proven TNT bead, add the proprietary 4C Graphene compound, and top it off with a moto-inspired tread design with progressive width siping. - Progressive feel on the effective edge, allowing for that fine-touch tactile feel that top racers expect - The insert below the tread provides additional puncture protection - Progressive sipe-width pattern provides tactile grip at the knob surface, without sacrificing speed or grip - Moto-block square knobs offers stability and durability - Whether shredding rocks, roots, or mixed terrain, Martello delivers

The Mazza Race has been developed to provide the best combination of riding feeling and performance for technical trails at maximum speed. Deep siping allows the tire to roll fast while still opposing drift, especially in off-camber terrain. The stepped leading edge rolls like a ramp, but digs in on climbs, making Mazza a top choice for both front and rear use. - Generous tread depth claws into a range of terrain, and is stabilized with Vittoria’s proprietary 4C compound layering process, allowing the surface of the tread to remain tacky, while the base remains planted - Wach effective edge is kept in place under high cornering and braking loads, leading to reduced rolling resistance, and increased wear life - Substantial room was designed into the center tread to provide braking traction, while also accelerating cleaning - Cornering is handled by Vittoria’s trademark progressive sipe width technology, which gives a gummy inside effective edge, without instability - New Enduro Race Casing with insert below the tread provides additional puncture protection

The Corsa has been the race-day choice of pros for years and is now better than ever. The Corsa achieves the holy grail of performance: speed, suppleness, durability, and reliability. Whether winning a Grand Tour, or a local crit, the Corsa family delivers world-class performance. - 320 TPI Kevlar reinforced Corespun-K casing for increased sidewall protection - 4 separate Graphene rubber compounds

The must-have kit for all tubeless tire users! The Tubeless Road Kit is the Vittoria all-in-one package for the best experience on your tubeless tires. The kit contains two Air-Liner Road inserts, one Universal Tubeless Tire Sealant bottle and the Road Tubeless Tool-kit - pliers and clips for easy tubeless tire removal. Contains two Air-Liner Road inserts, liquid sealant and pliers for easy tire removal. *DISPLAY BOX NOT INCLUDED THROUGH ONLINE SALE* Sizing recommendation: - Small, 700 x 23-26mm - Medium, 700 x 27-29mm - Large, 700 x 30-32mm

This race-day-specific weapon has raised the bar on tire technology. The Corsa Speed uses a proprietary Graphene compound, which is then paired with an ultra-fine Corespun-T casing. The end result is a tire that maintains the lowest rolling resistance, while still providing the trademark Corsa suppleness and outstanding wet weather grip - 320 TPI Corespun cotton casing - Proprietary Graphene compound - Lightweight, flexible latex inner tube

- Ingenious snap-In plugs do the work of rim tape at 1/3 The weight - Makes tire installation easier and nipple repairs faster than with tape - Red plugs fit rims with 8mm holes - Yellow plugs fit rims with 8.5-9.3Mm holes

The Speedster is designed for rolling speed and minimal drag on hard-pack or paved terrain. The honeycomb center tread provides virtually zero rolling resistance and unbelievable tread life. This feature also gives you excellent traction in dry or wet conditions. Large diamond shaped side knobs provide the grip you need in corners, while the tread knobs get smaller towards the center for the ultimate speed and traction. And with its balloon-style structure, you’ll feel like you’re floating on air.

The Speedster is a high performance race and dirt jump tire designed for speed and minimal drag on hard packed or paved terrain in wet or dry conditions. - Honeycomb center tread provides added traction and increased speed with very low rolling resistance; large diamond shaped side knobs give extra grip and cornering control - Large diamond shaped side knobs give extra grip and cornering control - Low Specific Gravity Compound is lightweight and designed for high speed

- Fast rolling on hardpack and paved terrain - Honeycomb center tread has minimal rolling resistance and long tread life - Diamond shaped side knobs offer great cornering grip - Low Specific Gravity (LSG) rubber compound

Born in BMX racing competition, Speed Booster is designed to meet the demands of lighter weight, better stability when cornering, good rolling resistance at high speed and grippy contact to the track, thanks to new developed LSG+ compound that is used exclusively for the Speed Booster. - Folding bead BMX race tire - LSG+ compound: Based on Vee's roadbike compound with 66 hardness now applied for BMX racing with great rolling resistance for hard pack circuit but at the same time holds grip from start, with fast cornering

The Speedster is designed for rolling speed and minimal drag on hard-pack or paved terrain. The honeycomb center tread provides virtually zero rolling resistance and unbelievable tread life. This feature also gives you excellent traction in dry or wet conditions. Large diamond shaped side knobs provide the grip you need in corners, while the tread knobs get smaller towards the center for the ultimate speed and traction. And with its balloon-style structure, you’ll feel like you’re floating on air.

Growth and mature in gravity segment that demands tires have great performance for varieties of terrain from mud, dry or loose soil. Flow Snap is expanded into Plus Size with more air volume for more fun in trail.

Growth and mature in gravity segment that demands tires have great performance for varieties of terrain from mud, dry or loose soil. Flow Snap is expanded into Plus Size with more air volume for more fun in trail.

Growth and mature in gravity segment that demands tires have great performance for varieties of terrain from mud, dry or loose soil. Flow Snap is expanded into Plus Size with more air volume for more fun in trail.

- Minimal rolling resistance for pavement, beach, hardpack or gravel - Weight optimized 120tpi casing, silica rubber compound - Tubeless ready bead/casing

- A larger variation on the original Snowshoe tire with all-weather Silica rubber blend - Weight optimized 120tpi casing, max tire pressure 20psi - Tubeless ready bead/casing

- Studded tire for added traction when conditions get icy - Weight optimized 120tpi casing, Silica rubber, max tire pressure 20psi - Tubeless ready bead/casing

- Aggressive Tread Design - Enhanced Steering Performance - Off Camber Grip - Low Rolling Resistance - Excellent Float - Great for blocked trails or loose snow - 240 studs

- Aggressive Tread Design - Enhanced Steering Performance - Off Camber Grip - Low Rolling Resistance - Excellent Float - Great for blocked trails or loose snow - 240 studs

Aim higher: at 54% lighter, 2x more puncture-resistant, and 50% smaller packed size compared to standard rubber tubes, Tubo-BMX tubes jump to new heights. - 42mm valve length

Minimum weight and maximum protection: Tubo-MTB-Plus tubes are optimized for tire widths from 2.5" to 3.0", today’s standard for E-MTBs. Their low weight of 105g (for 27.5+) increases your battery life, and they're also a lightweight alternative to tubeless setups. - 42mm valve length

For 29er tires, more than 100g per wheel can be saved with Tubo tubes compared to standard butyl tubes—and almost twice as much space when packaged. Their riding safety is twice as high as for standard tubes and offers maximum protection against a breakdown. The assembly is just as easy as standard tubes. Tubolito tubes are also a lightweight alternative to a tubeless setup. - 42mm valve length

Super light at only 38g, the Tubo-ROAD-700c makes racing bikes even lighter. It's 70g lighter compared to a standard tube, a decisive success factor both over challenging long distances and when it comes to seconds. Suitable for disc and rim brake wheels.

Even lighter, even more compact, and ideal as a spare, the S-Tubo-MTB tubes were developed to have a minimum possible packaging size. With a removable valve stem, the tubes have a size of only Ø3.5cm x 5cm height when packaged. The puncture resistance is the same as with standard butyl rubber tubes but with a weight of only 45g (for 29"). - 42mm valve length

At a featherweight 23g, the super-compact (when rolled up) S-Tubo-Road tubes stand out with very low rolling resistance which outpaces standard rubber tubes. With a 78% smaller packed size and the same puncture resistance as standard tubes, the S-Tubo-Road is the perfect choice as a spare and can be the crucial factor when you’re riding long and hard. - Ready for disc brakes (not suitable for rim brakes)

Tioga inner tubes are designed to work with the larger diameter OS20 tire standard.

Front and rear BMX race tires designed to balance traction and low rolling resistance with a block-designed center tread. - UTC rubber compound - Patterned sidewall adds abrasion protection while maintaining casing suppleness