Parts

- Convert any vertical dropout frame with derailleur hanger to a singlespeed - Spring loaded arm keeps tension on chain, Pulley axle adjusts to optimize chainline - Chain retention hoop prevents chain derailment

45NRTH's Replacement Pedal Pins are a great way to customize the style and grip of your 45NRTH pedals (sold separately). These tough, aluminum pins deliver fantastic bite into traditional winter boots, and come in a variety of colors to coordinate with your rig. Plus, the included wrench keeps the job quick. - Includes: 32 pins and wrench

This Service Kit from All-City Cycles includes a derailleur hanger, axle stud, and nut. The derailleur hanger is compatible with any frame out there, but you’ll need the included axle stud and nut for mounting to an All-City frame. - Alloy construction - Replacement derailleur hanger sold separately (Part Number DP0814) - Axle Stud and Nut are compatible only with All-City Space Horse, Gorilla Monsoon, and Cosmic Stallion Titanium frames

All-City Singlespeed Disc Brake Adaptor 

• M4 threaded pedal cages mounting holes • Four windows in pedal body large enough to fit double toe straps • Polished Body • Concave footbed • Single-sided design

Pretty up your ride and secure your seatpost with the All-City Shot Collar seat clamp. - Laser-etched All-City logo - Aluminum body with stainless steel hardware

Designed specifically for All-City’s Cosmic Stallion Titanium Frameset, this Cable Port Service Kit helps guide internally routed housing through the frame. Compatible with a wide range of brake, drivetrain, and dropper post options, all the screws and plates required to configure your setup are included. - Aluminum hatch cover with stainless screws - All necessary screws and plates included

- Lightweight stainless steel rotor, Great for all-Mountain or enduro use - International standard 6-Bolt 44mm bcd rotor mounting. 95/112/154G

- Slim style seat with minimal foam padding - Hollow Pivotal bolt for added weight savings - Pivotal fitment only

Gecko Grip is EVA foam and ventilated polyurethane in a laminated, layered construction. Gecko Grip has a rubbery, "grippy" feel compared to cork tape. It lays flat on the wrapped bars and is thinner than cork. It doesn't absorb sweat as easily as cork and can be wiped off with a wet rag in seconds.

Rubber Gecko is a cushy bar tape made with foam and an outer layer of natural rubber. Rubber Gecko offers a soft tactile grip with a bit of give to it. It wraps slightly fatter than our original gecko grip, but not by much. Perfect for the rainy, cold cobbled classics.

Cork wrap is really a lot of foam with cork chunks mixed in. It's thick and softens road vibration. It can soak up moisture yet remains easy to grip. It's durable and easy to install. It holds color well and doesn't fade. You can wash it like you wash the car; soapy rag, scrub, rinse, repeat.

Art Gecko is our new grippy polyurethane rubber bar tape with a colorful artistic patter on the drops. This pattern is called a tri-color tessellation. When wrapped from the bottom it fades to black about where the brake levers mount. - Artistic pattern, 9 colorful choices - Color below the drops, black up top - Great feel, Polyurethane rubber surface - 220 cm rolls, plenty of length - Nice flat wrap - 92 grams including the plugs

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Built around one of our original breakthrough designs, the Speed Dial 7 is the smooth and powerful way to control linear-pull or mechanical disc brakes. They are super easy to install and adjust so you can dial in the modulation just the way you like. - Compatible with mechanical disc brakes and linear-pull brakes. - Reach Adjust and Speed Dial Leverage Adjust - Reversible

The squeeze of our levers is what dreams are made of (and you know which dreams we're talking about). Most of our levers can be swapped to be run either front or rear, which is convenient if you like to your brakes reversed and a Godsend if you bust a lever in the middle of the woods. Avid levers are easy to install, simple to set up, and a pleasure to pull. - Reach Adjustment - Qwik-Adjust Barrel Adjuster - Compatible with mechanical disc brakes and linear-pull brakes

- Includes stainless bolts - Fits 160mm front and 140mm rear rotors

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

To keep your Avid brakes functioning properly, check your pads for wear and replace them when necessary. Organic compound pads are softer for quieter braking and increased modulation, while metallic pads dissipate heat better and last a bit longer. Two pads, one retraction spring and a mounting bolt are included (enough for one brake) in each pad set. And, choose an aluminum backing plate if you're really counting the grams.

Avid's Front 180mm/Rear 160mm Post Bracket Hardware Kithas everything you need to mount a front 180mm or a rear 160mm rotor (sold separately) to your bike.

Avid's Front 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the front of your bike. Kits include mounting bolts and post mount spacers for front brake installation.

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

Avid, Post Bracket, Includes Stainless Caliper Mounting Bolts (CPS and Standard)

- Includes stainless steel bolts - 40mm fits 200mm Front and 180mm Rear Rotors

Avid's Rear 170mm Post Bracket Hardware Kit has everything you need to mount a 170mm rotor (sold separately) to the back of your bike. Kits include mounting bolts and a 30mm post mount spacer for rear brake installation.

Bolt on Avid's Shorty Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.

Clean up your control center with Avid's Matchmaker clamp. It combines the mounts for your SRAM shifters and Avid brake levers into one simple, sleek unit so you can drop some grams and keep your bar nice and tidy.

Cost effective stopping power from the leader in cable-actuated disc brakes. - All calipers have 74mm mounting bolt spacing - For use with with long cable-pull levers - Mono-block caliper design has outboard pad adjustment - Spring tension is adjustable - Includes steel-backed organic pads - Brake Caliper Type: Post Mount - Brake Lever Actuation: Long Pull - Rotor Included: No - Weight: 215 g

Bolt on Avid's Shorty Ultimate Brake Pads for excellent braking no matter the conditions. The easy-to-use cartridge design makes swapping pads a breeze.